NAGIOS: RODERIC FUNCIONANDO

In vitro experimental study of bonding between aluminium oxide ceramics and resin cements

Repositori DSpace/Manakin

IMPORTANT: Aquest repositori està en una versió antiga des del 3/12/2023. La nova instal.lació está en https://roderic.uv.es/

In vitro experimental study of bonding between aluminium oxide ceramics and resin cements

Mostra el registre parcial de l'element

dc.contributor.author Román Rodríguez, Juan Luis es
dc.contributor.author Roig Vanaclocha, Ana es
dc.contributor.author Fons Font, Antonio es
dc.contributor.author Granell Ruiz, María es
dc.contributor.author Solá Ruiz, María Fernanda es
dc.contributor.author Amigó Borrás, Vicente es
dc.contributor.author Busquets Mataix, David es
dc.contributor.author Vicente Escuder, Ángel es
dc.date.accessioned 2017-07-27T08:47:08Z
dc.date.available 2017-07-27T08:47:08Z
dc.date.issued 2010 es
dc.identifier.citation Román Rodríguez, Juan Luis ; Roig Vanaclocha, Ana ; Fons Font, Antonio ; Granell Ruiz, María ; Solá Ruiz, María Fernanda ; Amigó Borrás, Vicente ; Busquets Mataix, David ; Vicente Escuder, Ángel. In vitro experimental study of bonding between aluminium oxide ceramics and resin cements. En: Medicina oral, patología oral y cirugía bucal. Ed. inglesa, 15 1 2010: 21- es
dc.identifier.uri http://hdl.handle.net/10550/60406
dc.description.abstract To evaluate bond strengths of different resin cements to two aluminum oxide-based ceramics. Methods: One hundred ten ceramic cylinders were produced and given four different surface treatments. Resin cement cylinders were then bonded to the ceramic cylinders using different resin cements and the bond strength was determined by shear testing to the breaking point. We were thus able to obtain results for the different combinations of porcelain, surface treatments and cements. All data was analyzed using the Kruskal-Wallis test for more than two independent samples and the Bonferroni correction applied (a=0.01). An optical microscopy study was carried out to analyze the type of failure, and an electronic microscopy examination was carried out in order to evaluate the changes produced in the ceramic by the different surface treatments. Results: The best values corresponded to the control group, composed of silicate ceramics combined with Variolink II resin cement. In-Ceram Alumina showed no significant differences with respect to the type of cement applied. Procera AllCeram obtained the best values when silica coated using the CoJet System and applying Variolink II, or when sandblasted and applying Clearfil SE Bond + Porcelain Bond Activator and Panavia F cement. Significance: Surface treatment modifies the ceramic surface and influences the bond strength, as does the type of cement used. Silica coating is recommended to improve adhesion to Procera AllCeram, applying Variolink II, or sandblasting plus resin cement containing MDP (Panavia F) es
dc.title In vitro experimental study of bonding between aluminium oxide ceramics and resin cements es
dc.type journal article es_ES
dc.subject.unesco UNESCO::CIENCIAS MÉDICAS es
dc.identifier.doi 10.4317/medoral.15.e95 es
dc.type.hasVersion VoR es_ES

Visualització       (401.0Kb)

Aquest element apareix en la col·lecció o col·leccions següent(s)

Mostra el registre parcial de l'element

Cerca a RODERIC

Cerca avançada

Visualitza

Estadístiques