NAGIOS: RODERIC FUNCIONANDO
Cleaning and retreatment protocol for a debonded ceramic restoration
Repositori DSpace/Manakin
- Inici
- Investigació
- Revistes
- Journal of Clinical and Experimental Dentistry
- Journal of Clinical and Experimental Dentistry. 2015. Vol. 7, no. 1
- Visualitza element
IMPORTANT: Aquest repositori està en una versió antiga des del 3/12/2023. La nova instal.lació está en https://roderic.uv.es/
Cleaning and retreatment protocol for a debonded ceramic restoration
Mostra el registre complet de l'element
|
Visualització
|
| Román Rodríguez, Juan Luis; Alonso Pérez Barquero, Jorge; Bruguera Alvarez, August; Agustín Panadero, Rubén; Fons Font, Antonio | |||
| Aquest document és un/a article, creat/da en: 2015 | |||
|
|||
| Objectives: The aim of this article is to propose a resin cement cleaning protocol for use before recementing a debonded restoration. Study Design: Ceramic samples were fabricated from IPS d.sign® and IPS e.max Press® and were treated with hydrofluoric acid etching (HF), or HF+silane (S), or HF+S+adhesive or HF+S+A+resin cement. All samples were placed in a furnace at 650º for one minute in order to attempt to pyrolyze the composite. Each step was examined under scanning electron microscopy (SEM). Results: When the cleaning protocol had been performed, it left a clean and retentive surface. Conclusions: If the restoration is placed in a furnace at 650º for one minute, the composite cement will burn or pyrolyze and disappear, allowing conventional retreatment of the ceramic before rebonding. | |||
| Veure al catàleg Trobes |