NAGIOS: RODERIC FUNCIONANDO

Optical impact of correcting elements

Repositori DSpace/Manakin

IMPORTANT: Aquest repositori està en una versió antiga des del 3/12/2023. La nova instal.lació está en https://roderic.uv.es/

Optical impact of correcting elements

Mostra el registre parcial de l'element

dc.contributor.advisor Ferrer Blasco, Teresa
dc.contributor.author Zoulinakis, Georgios
dc.contributor.other Departament d'Òptica es_ES
dc.date.accessioned 2016-12-15T10:20:17Z
dc.date.available 2017-12-16T05:45:04Z
dc.date.issued 2016 es_ES
dc.date.submitted 13/12/2016 es_ES
dc.identifier.uri http://hdl.handle.net/10550/56466
dc.description.abstract Correcting elements such as intraocular lenses (IOL) and contact lenses (CL) are commonly used in ophthalmology in order to correct refractive errors, presbyopia and cataract. Thus, these optical elements are in the center of scientific research and development. The optical impact of these elements is the main subject of this Doctoral Thesis. The optical impact refers to the optical results that these elements induce in the optical system of the human eye. The visual impact is also simulated and calculated in order to find the differences between the optical and the visual quality of a human eye model with correcting elements. Thus, then present Thesis is about developing models using simulations in a computer-programming environment to address the optical and visual impact of optical elements applied in elderly-related disabilities and to propose alternatives to current approaches. All the designs in this Thesis are about IOLs and CLs that are designed following general characteristics and not specific guidelines of a patent or an element that is copyrighted. In the first chapter, there is a general introduction of the topic. There is information about the human eye biology and its different parts. There is a description of the accommodation function and how is affected by presbyopia. In the end there are listed some methods of correction of the presbyopic effects, such as IOLs and CLs. There is also a short description about the human eye models in general. In the second chapter, there is a comparative study about human eye models that are used in vision sciences. In this chapter, a comparison between three theoretical eye models is done, the Navarro, the Arizona and the Liou-Brennan eye models. The comparison is about the ability of these models to simulate accommodation and if the results that they produce are the same or if there are differences and where these differences are due to. In the third chapter, there is a study about the dioptric power distribution between the anterior and posterior surfaces of a monofocal IOL. In this chapter is tested whether the anterior or the posterior surface of an IOL is optimal to carry the largest amount of dioptric power of the IOL. It is also tested on which of the two surfaces the asphericities of an aspheric IOL have to be designed for better optical quality. In the fourth chapter, a study about optical and visual results is taking place. The study is about monofocal IOLs that are designed in customized (personalized) human eye models. The customization is on the anterior corneal surface that is altered with topographic data from real patients. The IOLs are combined with CLs designs and their designs are either optimized or non-optimized, in order to test the difference between their impacts. There is also a study of different misalignments such as decentrations and tilts, in order to test the tolerance of the designs in such conditions. In the fifth chapter, there is a continuation of the previous study. Diffractive bifocal IOLs are designed in the same group of personalized human eye models and the optical and visual results are compared. The IOLs are tested without the combination of CLs in this study. There is also a comparison of different misalignments (decentrations and tilts) in order to compare the designs’ tolerance in such conditions for far and near target distances. And finally in the sixth chapter, an intraocular telescopic system is designed with different positioning in the eye model. The position of the telescope changes the optical and visual results produced. There is also a misalignment comparison between the designs that tests the image projection quality on the retinal plane of the model. en_US
dc.description.abstract Elementos correctores tales como lentes intraoculares (LIO) y lentes de contacto (LC) se usan comúnmente en oftalmología para corregir los errores de refracción, la presbicia y las cataratas. Por ello, estos elementos ópticos están en el centro de la investigación científica y el desarrollo. El impacto óptico de estos elementos es el tema principal de esta tesis doctoral. El impacto óptico se refiere a los resultados ópticos que inducen estos elementos en el sistema óptico del ojo humano. El impacto visual también se simula y se calcula con el fin de encontrar las diferencias entre la óptica y la calidad visual de un modelo de ojo humano con diferentes elementos correctores. Por lo tanto, la presente tesis versa sobre el desarrollo de modelos utilizando simulaciones en un entorno de programación para abordar el impacto óptico y visual de los elementos ópticos aplicados en las discapacidades relacionadas con el envejecimiento y proponer alternativas a los enfoques actuales. Todos los diseños de esta tesis son acerca de LIOs y LCs que están diseñadas siguiendo características generales y no siguiendo pautas específicas de una patente o un elemento que está protegido por derechos de autor. En el primer capítulo hay una introducción general del tema. Hay información sobre la biología del ojo humano y sus diferentes partes. Hay una descripción de la función acomodativa y cómo se ve afectada por la presbicia. Al final se enumeran algunos métodos de corrección de la presbicia tales como LIOs y LCs. También hay una breve descripción sobre los modelos de ojo humano en general. En el segundo capítulo, hay un estudio comparativo sobre los modelos de ojo humano que se utilizan en las ciencias de la visión. En este capítulo, se hace una comparación entre tres modelos de ojo teóricos, los modelos de ojos de Navarro, el de Arizona y el de Liou-Brennan. La comparación es acerca de la capacidad de estos modelos para simular la acomodación y si los resultados que producen son los mismos o si hay diferencias y dónde se produces éstas. En el tercer capítulo, se realiza un estudio sobre la distribución de la potencia dióptrica entre las superficies anterior y posterior de una LIO monofocal. En este capítulo se comprueba si la superficie anterior o posterior de una LIO es óptima para llevar la mayor cantidad de potencia dióptrica de la LIO. También se comprueba en cuál de las dos superficies de una LIOS asférica tiene que ser diseñada la asfericidad para una mejor calidad óptica. En el cuarto capítulo se lleva a cabo un estudio sobre los resultados ópticos y visuales. El estudio trata sobre LIOs monofocales diseñadas en modelos de ojos humanos personalizados. La personalización está en la superficie corneal anterior que se altera con datos topográficos de pacientes reales. Las LIOs se combinan con diseños de LCs y sus diseños están optimizados o no con el fin de probar la diferencia entre sus impactos. También hay un estudio de diferentes desajustes tales como descentramientos e inclinaciones con el fin de probar la tolerancia de los diseños en tales condiciones. En el quinto capítulo, hay una continuación del estudio anterior. Las LIOs bifocales difractivas están diseñadas en el mismo grupo de modelos de ojos humanos personalizados y se comparan los resultados ópticos y visuales. Las LIOs se prueban sin la combinación de LCS en este estudio. También hay una comparación de diferentes desajustes (descentramientos e inclinaciones) con el fin de comparar la tolerancia de los diseños en tales condiciones para distancias de lejos y cerca. Y finalmente en el sexto capítulo se diseña un sistema telescópico intraocular con diferente posicionamiento en el modelo del ojo. La posición del telescopio cambia los resultados ópticos y visuales producidos. También hay una comparación del desajuste entre los diseños que comprueba la calidad de la imagen proyectada en la retina. es_ES
dc.format.extent 126 p. es_ES
dc.language.iso en es_ES
dc.subject optica, vision, presbicia es_ES
dc.title Optical impact of correcting elements es_ES
dc.type doctoral thesis es_ES
dc.subject.unesco UNESCO::CIENCIAS DE LA VIDA es_ES
dc.embargo.terms 1 year es_ES

Visualització       (4.143Mb)

Aquest element apareix en la col·lecció o col·leccions següent(s)

Mostra el registre parcial de l'element

Cerca a RODERIC

Cerca avançada

Visualitza

Estadístiques