NAGIOS: RODERIC FUNCIONANDO

Development of atmospheric correction algorithms for very high spectral and spatial resolution images: application to SEOSAT and the FLEX/Sentinel-3 missions

Repositori DSpace/Manakin

IMPORTANT: Aquest repositori està en una versió antiga des del 3/12/2023. La nova instal.lació está en https://roderic.uv.es/

Development of atmospheric correction algorithms for very high spectral and spatial resolution images: application to SEOSAT and the FLEX/Sentinel-3 missions

dc.contributor.advisor	Moreno Méndez, José F.
dc.contributor.advisor	Verrelst, Jochem
dc.contributor.author	Sabater Medina, Maria de las Neus
dc.contributor.other	Departament de Física de la Terra i Termodinàmica	es_ES
dc.date.accessioned	2018-05-02T09:55:58Z
dc.date.available	2018-06-02T04:45:05Z
dc.date.issued	2018	es_ES
dc.date.submitted	08-05-2018	es_ES
dc.identifier.uri	http://hdl.handle.net/10550/65907
dc.description.abstract	Advanced high spectral and spatial resolution imager spectrometers on board new generation of Earth Observation missions bring new exciting opportunities to the remote sensing scientific community. However, this progress goes hand in hand with new challenges. The exploitation of data acquired from these family of advanced instruments requires new processing algorithms able to deal with these particularities. As part of this evolution, atmospheric correction algorithms - a mandatory processing step applied prior to the Earth surface reflectance data exploitation - must be adapted or reformulated, thereby paying special attention to how atmospheric effects disturb the acquired signal in the spectral and spatial domains. For these reasons, this Thesis aims to develop new atmospheric correction strategies to be applied over very high spectral and spatial resolution data. Following this goal, this Thesis was conducted in the framework of two missions during their development phase: (1) the FLEX/Sentinel–3 tandem space mission (for high spectral resolution data) and, (2) the Ingenio/SEOsat space mission (for high spatial resolution data). In the context of these missions, an additional challenge is introduced when acquiring proximal remote sensing data for their validation. This is especially relevant for the FLEX mission, which is dedicated to monitor the weak Solar Induced Chlorophyll Fluorescence (SIF) signal. Following this motivation, the main objectives of this Thesis are threefold: The first objective involved to analyse atmospheric effects on the Ingenio/SEOsat high spatial and low spectral resolution satellite mission and to propose a new atmospheric correction strategy. This strategy was called Hybrid and combines: (1) a per–pixel atmospheric radiative transfer model inversion technique making use of auxiliary data to characterize the atmospheric state, followed by (2) an image deconvolution technique modelling the atmospheric MTF to correct for atmospheric spatial effects. The Hybrid method was applied to Sentinel–2 data, particularly over bands acquired at 10 m resolution due to its similarities with the Ingenio/SEOsat mission. The second objective involved to define a novel atmospheric correction strategy for the FLEX/Sentinel-3 tandem mission. The proposed strategy is a two-steps method where information from Sentinel-3 instruments, OLCI and SLSTR, is first used in synergy to characterize the aerosol and water vapour presence. The high spectral resolution of FLEX data is subsequently exploited to refine the previously aerosol characterization. As part of this objective, the suitability of all the approximations assumed in the formulation proposed for the atmospheric inversion of FLEX data was validated against the FLEX mission requirements. The third objective involved to develop a strategy that deals with the atmospheric correction of very high spectral and spatial resolution data acquired at lower atmospheric scales such as Unmanned Aerial Vehicles or systems mounted on towers. In this Thesis, it was demonstrated that even when acquiring the signal at proximal remote sensing scale, i.e., few meters from the target oxygen absorption must be compensated to properly estimate SIF within these spectral regions. For this reason, a strategy to compensate for the oxygen absorption while properly dealing with the instrumental spectral response function convolution was presented and tested using simulated data. Altogether, this work identified challenges associated to atmospheric correction when applying to high spatial and especially to very high spectral resolution data. In this Thesis, adequate formulations have been developed to resolve these difficulties, and successful methodologies have been designed for the particular cases of SEOsat (high spatial resolution) and FLEX (high spectral resolution); two future remote sensing space missions that will be launched in the forthcoming years.	es_ES
dc.format.extent	244 p.	es_ES
dc.language.iso	en	es_ES
dc.subject	teledetección	es_ES
dc.subject	Corrección atmosférica	es_ES
dc.subject	Fluorescencia	es_ES
dc.subject	SEOSAT	es_ES
dc.subject	FLuorescence EXplorer (FLEX)	es_ES
dc.title	Development of atmospheric correction algorithms for very high spectral and spatial resolution images: application to SEOSAT and the FLEX/Sentinel-3 missions	es_ES
dc.type	doctoral thesis	es_ES
dc.subject.unesco	UNESCO::CIENCIAS DE LA TIERRA Y DEL ESPACIO	es_ES
dc.embargo.terms	1 month	es_ES