This study was aimed to evaluate the influence of inter-implant distance on the wear characteristics of low-profile stud attachments used in mandibular implant retained overdentures. Forty Completely edentulous participants aged between 50 ? 70 years were enrolled in this study. Each patient received 2-implants by 2-stage submerged surgical protocol. Participants categorized into 4-groups. Group I: 19 mm inter-implant distance with Locator retained overdentures; Group II: 19 mm inter-implant distance with OT Equator retained overdentures; Group III: 25 mm inter-implant distance with Locator retained overdentures; Group IV: 25 mm inter-implant distance with OT Equator retained overdentures. The female housings of each attachment were picked up to the mandibular overdenture. 12 month later the male inserts were replaced by new one. The used retentive male inserts were examined by Stereomicroscopic. Stereomicroscopic examination revealed wear were detected on both inner surface and, the core of male inserts. Comparison between the unused and the used Locator and OT equator retentive male inserts at various inter-implant distance revealed highly significant wear changes between them at either 19 mm, or 25 mm inter-implant distance P1= .000, P2=.000 respectively. After one year of implant overdenture clinical use; both locator and OT equator retentive male inserts revealed significant surface deformities and wear. Wear were more notable on both locator and OT equator retentive male inserts with 25 mm interimplant distance than with 19 mm interimplant distance.